Vaporiser –Condenser

Vaporisers and condensers are available as a standardised series in the low to medium power range. Essentially, this series was developed for ammoniac systems, but other media are possible on request.

The devices are fitted with a pipe bundle consisting of straight pipes to simplify inspection and cleaning. The vaporiser is a flooded vaporiser with integrated liquid separator. The vaporiser has a filling capacity exactly tuned to the operating conditions, and this must be regulated with precision. We recommend the use of low-pressure regulating valves and a filling capacity adjusted precisely for the entire system. Ideally, the condensers and vaporisers of this series should be used in combination. Both products are available in all-welded and in sealed construction variants. All vaporisers/condensers may be operated with fresh water, recirculated cooling water or cooling towers. Seawater-resistant models, constructed from CuNi or titanium, are available on request.

Technical Information Vaporiser

  • Specific shell pipe diameter: DN200, DN250 und DN350
  • Tube material: 1.4404, CuNi10Fe1Mn, Titan
  • Bundle length: up to 3600 mm
  • Heat capacity: 1 kW up to 1200 kW

Technical Information Condenser

  • Specific shell pipe diameter: DN200, DN250 und DN350
  • Tube material: 1.4404, CuNi10Fe1Mn, Titan
  • Bundle length: up to 3600 mm
  • Heat capacity: 1 kW up to 1000 kW

Service

We still believe in CUSTOMER SERVICE. We guarantee Advice in development and implementation ... more

Quality assurance

Customer account management, along with the production of our products, is carried out exclusively by qualified ... more